INDUSTRIAL SUPERGLUE HV

INDUSTRIAL SUPERGLUE HV is a high viscosity setting industrial adhesive based on advanced cyanoacrylate technology.

Benefits:

• Fast setting formulation, bonds to most porous and non-porous surfaces in seconds.
• Fills gaps up to 0.25mm.
• Single component adhesive.
• 100% solvent free.
• Economical in use.

Limitations:

• Ensure surfaces are degreased prior to bonding.
• Ensure surfaces are close fitting.
• This adhesive will not bridge gaps.
• Do not use in applications involving constant water immersion.
• Do not use on bitumen or tar leaching products.
• If in doubt, contact KORE technical services for advice.

Application:

The surfaces to be glued should be clean, dry, and free from dust, grease, and other contaminants. Materials should be stored in a warm environment prior to bonding to avoid chilling of the glue line, which leads to extended setting times. Where possible, ensure the working environment has a relative humidity of 50% or more.

Apply adhesive to one surface only. Press surfaces together and hold for 10 seconds or as indicated below. Cure speed is rapid, so exercise care when aligning.

Specific Data:

Form Clear liquid.

Viscosity 120-180 poise

Base Ethyl Cyanoacrylate

Solids 100% Active

Specific Gravity 1.1 g/cm3

Shear Strength  >20Nmm2 (steel-steel ASTM D1002)

Refractive index 1.45 (cured adhesive)

Softening Point  160OC

Working temps. -60 to +80oC

Setting times  15 - 40 seconds (plastic to plastic) 

Health & Safety:

Contact Mease Valley for MSDS for a full list of hazards.

Storage:

Store in cool, dry conditions between +5°C and +25°C. Ensure good ventilation. Storage outside these parameters will dramatically reduce shelf life.

Shelf Life:

12 months from the date of manufacture when stored as directed.